New name on port and starboard...
...and stern too
The wind generator and the RVG still need to be attached to the transom and it also needs some paint touch-ups.
Jordan has also drilled more thru-hulls (1 for the watermaker intake, 1 for the holding tank, and 1 for the Frigoboat refrigerator)...it hurts to drill holes below the waterline!
Jordan has noticed for some time that the oil pressure is not quite right. After starting the engine, it takes about 5 minutes before the pressure comes up to normal. Rob Cross, a fellow BCA member and sailor, managed to solve this mysterious problem and everything is now running perfect. Rob has also talked at a few Fleet evenings discussing diesel engines (great man to run across when sailing and having engine problems!)
Unexpected work that is being done: we discovered that we needed a new prop shaft so we are waiting for it to be made at half the price of a new one. Once the shaft (and propeller) are put back into the boat, we can go back in the water where the rigging will be fine-tuned and the boom will be put back onto the mast. And I can get back to painting all the impossible to get into cubbyholes, drawers, closets, inside hull, cupboards, etc. etc.
Right now, Coyote Canvas is sewing our new dodger - then the current full enclosure over the cockpit will be removed. For protection from the hot sun, we will put up a bimini that we can remove during heavy winds.
And our new countertops have been ordered. Things are looking up!